MODELS OF
DOORS REFRIGERATING

DOOR FAST STACKABLE AUTORREPARABL SDAUT-FRIGO

Quick refrigeration self-repairable door, moisture-proof and low temperatures with heavy traffic of trucks.
It has the self-repairable system, effective technical resource of relocation of the backdrop, which automatically returns to its guides after a collision, without interrupting the operating cycle and avoiding the intervention of the service.
Designed to combine with conventional Chamber doors.
Frame and curtain of canvas to choose among several possibilities, including door viewers.
It acts with different opening systems.
Low maintenance.

  • Self-supporting metal frame:
    • galvanized steel.
    • stainless steel.
    • painted in polyurethane (colour RAL).
  • Runners watertight self-lubricating and armed with the self-repairable system.
  • Optional: guides heating.
  • Backdrop: canvas polyester without reinforcements, high resistance to tear-out approximately 3000 N/cm in the warp. Self-extinguishing M2 fire resistance.
  • Canvas slip guided by self-lubricating profiles guarantees its tightness and resistance to wind up to class 3, and withstanding pressures up to 110 kg/m2
  • Three-phase motor with electric brake of soft stop c/c++ and manual release.
  • Optional: frequency inverter.
  • Mechanical limit switches integrated in the engine to control the position of the door.
  • The absence of rebar and the control panel with the drive controller (optional) allow a speed of up to 2.5 m/s.
  • Security systems.

OVERALL DIMENSIONS
Maximum dimensions: 5400 mm X 5500 mm.
Lintel: 900 mm (GAAP)
Vertical Bracelet (non-drive side): 220 mm.
Vertical wrist (motor side): 650 mm.

TECHNICAL CHARACTERISTICS
STRUCTURE


All of our doors are manufactured in sel-suporting frame, of profiled galvanized sheet steel of 2 mm thick. Given normal galvanized, with the possibility of be delivered in primed finish wash primmer or painted with polyurethane paint (colour RAL desired by the client and/or stainless steel).
Vertical guides series highlights with sealing brushes to prevent the entry of dust or air currents. Top drawer where mechanisms for the drag of the tapes using aluminum pulleys, staying shaft-drive with bearings fitted with grease nipples for subsequent maintenance and elastic plate of union between the motor and the shaft, thus avoiding the possible misalignment and vibration in the engine manoeuvres.
Galvanized thickness: 2 mm. Quality: DX51D Z-275NA
Steel stainless thickness: 2 mm. Quality: AISI 304

CURTAIN


Curtain sided with insulating material filling.

Technical characteristics
Polyester support: 1100 Dtex.
Total weight: 900 g/m2
Breaking strength: 400 / 360 daN / 5 cm
Tear resistance: 80/60 daN
Adhesion: 12 daN / 5 cm
Temperature resistance: - 30 ° 7 + 70 °
Lacquered: 2 faces
Windows: PVC, glass of high resistance

Colors

GEARMOTOR


Three-phase motor with direct attack on the primary shaft, electric brake of soft stop c/c++ and manual release of the crank at the height of the engine. Limit switches mechanical or encoder integrated in the engine to control the position of the door at any moment.

Technical characteristics
Rpm: 1400
Voltage: 220 / 380
Phases: III
Power: 0.75 3 CV according to door
Protection: IP 54
Brake: electromagnetic
Input rpm: 1400
RPM output: 92 142

SECURITY


Through photocells transceiver in the vertical door guides, with security system type test before performing maneuvers of closing.
Bottom of the curtain with conveyor systems antisquash safety, with detector type optical supervised at all times, inside bottom of danger, signposted as mobile danger zone finished yellow diagonal stripes in black. Signal system of the same type Radioband radio monitored before the closing manoeuvre, thus avoiding the placement of curly dock type cables.
Optionally door can provide a system of opening by battery type ups (uninterrupted power supply) in case of alarm or power supply failure.

ELECTRICAL MANEUVER


Metal box for the maneuvers of control, designed for Speed Door España complying with regulations of electric protection of low voltage. In the joins a circuit board with control logic, designed to perform thousands of operations a day, equipped with LEDs for control functions or possible anomalies of the door.
Contactors, motor guard, adjustable, preinstallation magnetic detector, receiver or flashing lights. Buttons for opening, closing, emergency stop and led indicator of voltage on front cover. Connection to their diet with 1.5 metres of cable 5 x 2.5, with plug 16 A Cetac type.

DRIVES


In Speed Door we have a wide range of drives with different controls, buttons, and other systems to optionally include in our doors, with the aim of facilitating the transit of goods, personal or vehicles.
-Handles ceiling.
-Photoelectric cells.
-Motion and presence detector.
-Transmitter remote.
-Additional buttons.
-Interconnection with any machine, roller, or assembly line.

DOWNLOAD TECHNICAL SHEET SDAUT SELF-REPAIRING fast door FRIGO (FREEZING)

DOWNLOAD TECHNICAL SHEET SELF-REPAIRABLE fast door SDAUT FRIGO (CONSERVATION)