MEGA-SDAN STEPABLE PUSTOY DOOR

Manufacture and installation of automatic fast doors for industry

MEGA-SDAN STEPABLE PUSTOY DOOR

Apileable fast door designed especially for considerable and complex dimensions facilities, With access to abroad.
Evolution of the Gran Sdan Model, structure, reinforcements and motorization are redesigned to cover the steps where the door and environment configuration are complex, For example Hangars.
Reinforced with horizontal interior crossbars that give it a great consistency, for intensive use under important air pressures or depressions.
Its structure allows you to make the most of the passage holes.
Great pond and low maintenance.
Bastor and canvas curtain to choose from between several possibilities, Including peepholes.
Acts with various opening systems.

Metallic Auto Bastor:
- of galvanized steel.
- stainless steel.
- Painted in polyurethane.
Curtain: Polyester canvas of great wear resistance, to corrosion and discoloration. Self -extinguishable fire resistance.
Side guides with tightness brushes.
Motor trifásico con electrofreno de c/c parada suave y desbloqueo manual.
Mechanical race integrated in the engine to control the door position.
Standard speed between 1 y 1,8 m/s.
Security: EMISOR-EPRATOR Photos; Anti -Planning Safety Palls; Lower danger zone.

General dimensions
Maximum dimensions: According to our technical office study.
Lintel: 950mm.(According to measures)
Vertical bracelet (Non -motor side): 250/500mm.
Vertical bracelet (motor side): 250/500mm.

Technical Characteristics
STRUCTURE

Our door guarantees great endurance, Energy reliability and savings, With minimal maintenance. Each door is designed in a personalized way, To support winds and bad weather, since it can be different depending on the area where it is installed. The upper cross beam is made of galvanized steel, Trained to support the engine, The bearings, The roller, the lifting straps and the door itself. Our standard model consists of two polyester panels, PVC coated and placed inside double -eye profiles, located at the ends of the horizontal bar, mounted on two lateral columns to cushion wind pressure, so that friction and noise are reduced during opening and closure of operations.
The panel consists of individual sections, so that, In case of damage or wear, There is no need to replace the entire panel, Only the damaged section. Horizontal bars consist of aluminum profiles with bolts designed to resist strong winds and personalized based on the needs of our customers and the peculiarities of the area where the door is installed.
The guides are made of galvanized steel, also personalizing its size and shape to support strong winds.
Galvanized steel thickness: 2mm. Quality: DX51D Z-275NA
Stainless steel thickness: 2mm. Quality: AISI 304

CURTAIN

It consists of two intermediate panties that are placed between the two PVC centers and are fixed through an anodized aluminum profile and fixing screws. They confer wind resistance to the sliding door on the side rails using special sliding blocks at both ends, They are also equipped with special bearings for noise damping.
Plastic canvases are high quality with wear resistance, To abrasion, to the discoloration and comply with Ignifugo certificate of type M2. Colors to choose in sample (rojo, yellow, verde, dark blue, light blue, blanco, negro, gris, crema, orange).
All welds made on the canvas are made by high frequency welding. Includes rectangular visor zone centered at the height of the view.

Technical Characteristics
Polyester support: 1100 DTEX.
Total weight: 900/1300 grams/m2
Breakage resistance: 4300 / 4000 N/50 cm
Tear resistance: 500/500 And
Adherence: 20 N/cm
Temperature resistance: -40º/ + 70º
Lacquered: 2 guys
Miravas: PVC Cristal, of great resistance

Colors

Motorcycle-Reductor

Three -phase motor with direct attack on the primary axis, Electrofrane of c/c soft stop and manual unlock. Mechanical or encoder race endings integrated into the engine to control the door position at all times. Standard speed between 1 y 1,8 m/s.

Technical Characteristics
R.p.m: 1400/3000
Voltage: 400
Phases: III
Power: 0,75 /3 CV according to Puerta
Protection: IP 54
Brake: Electromagnetic
R.p.m. Prohibited: 1400
R.p.m. Salida: 92 /142

SECURITY

Through emisor-receptor photochel, housed in the vertical door guides, with test safety system before performing closing maneuver.
Lower part of the curtain with anti -plastration security band, With detector inside optical type supervised at all times, Lower hazard zone marked as a mobile zone in yellow finish with diagonal stripes in black. Signal system of the same Radioband type via supervised radius before the closing maneuver, thus avoiding the placement of curly dock cables.
Optionally the door can be equipped with an opening system by counterweight or with sai battery (interrupted feed system)In case of alarm or lack of electricity supply.

Electric maneuver

Metal table for control maneuvers, Designed by Speed Door Spain complying with current low voltage electrical protection regulations. In the electronic plaque with control logic is incorporated, Designed to perform thousands of maneuvers a day, endowed with light indicators for the control of the functions or possible door anomalies.
Investment contactors, Adjustable motor keeps, Magnetic detector pre -installation, RECEPOR OR LIGHT LIGHTS. Opening buttons, closing, Emergency unemployment and tension signaling in front lid. Connection for food with 1,5 Cable meters 5 x 2.5, With Cetac type plug of 16 A.

Drives

In Speed Door we have a wide range of drives with different controls, buttons and other systems to optionally include our doors, with the aim of facilitating merchandise traffic, staff or vehicles.
– Roof handle.
– Photoelectric cells.
– Movement and presence detector.
– Remote emitter.
– Additional buttons.
– Interconnection with a machine, roller road or assembly line.